Forgot to take pictures while I was building the stand for my shaping and glassing, but I made the stand so I can interchange between shaping and glassing. The top part comes on and off and is held down with a bolt. I also made the cross beam removable so I can change it out with a longer beam for longboards. Seems to work pretty well. Doesn't wobble.
Here is the stand with the glassing attachment. It's narrower than the shaping attachment so it won't get in the way when doing the laps. And is taller so I don't have to strain my back. Getting older and older, it's just not as easy anymore :(I placed tape on the top, sticky side up so the board doesn't move around while I am glassing. There is that left over Oracle kneepad again.
4 comments :
Im just about to start shaping myself, first off is making the racks. I was wondering if you had some plans you could post or even some dimensions?
Hello, I am just about to start shaping myself. first up is making the racks, I was wondering if you had some plans or dimensions to help out?
how much
Damn such a sick design i also want to know the plans for this, i can see the bottom part but how did you make the top part, and how did you make it secure by the images it looks like there is one bolt holding the top half or is there something else to it dimensions, and the plans on how to build this would be great please give me an email at knibbsy182@gmail.com or reply to this comment
Post a Comment
Discuss it Here at the BoardSide Forum